| G AM 33 AF ANGULAR WINDOW WORKING CENTRE | |
| | |
| Electronic programmer with 10" colour video: | |
| - Possibility to enter single programs, complete | |
| working cycles | |
| - Automatic calculation of the entered quantities | |
| - Automatic star-delta start from computer | |
| - Floppy disk | |
| - Serial connection RS232 | |
| - PLC to administer machine keys with diagnostics | |
| |
| Technical data: TENONING UNIT | |
| - Sliding table stroke | 2200 mm. |
| - Useful height of programmed units | 600 mm. |
| - Useful stroke of spindle moulder axis | 550 mm. |
| - Countersupported spindle moulder axis dia. | 50 mm. |
| - Max. dia. of programmed tools | 320 mm. |
| - Spindle moulder rotation speed | 3200 r.p.m. |
| - Saw blade dia. | 400 mm. |
| - Max. cut height | 120 mm. |
| - Horizontal movement of saw blade | 100 mm. |
| - Motor power: | |
| saw axis | 4 hp (3 kw) |
| spindle moulder axis | 10 hp (7,5 kw) |
| - Suction dust hoods dia.: | |
| - Suction hood dia. | 80 mm. |
| saw axis | 80 mm. |
| spindle moulder axis | 150 mm. |
| | |
| |
| Technical data: NO. 2 PROFILING UNITS | |
| |
| 1st ELECTRONIC SPLINTER-PROOF PROFILING SHAFT | |
| Technical data: | |
| * Timing entering to avoid scraping during sashing | |
| programmable from computer | |
| * Electronic vertical positioning through continuous axes | |
| with re-circulating ball screw and left/right rotation | |
| * On-off horizontal pneumatic positioning programmable | |
| from computer | |
| - Useful height | 480 mm. |
| - Useful stroke | 480 mm. |
| - Spindle moulder shaft dia. | 50 mm. |
| - Shaft rotation speed | 6000 r.p.m. |
| - Max. tool dia. | 220 mm. |
| - Suction hood dia. | 150 mm. |
| - Shaft rotation speed | 6000 r.p.m. |
| - Motor power | 10 hp (7,5 kw) |
| |
| | |
| | |
| 2nd PROFILING SHAFT | |
| Technical data: | |
| * Electronic vertical positioning through continuous axes | |
| with re-circulating ball screw | |
| * On-off horizontal pneumatic positioning programmable | |
| from computer | |
| - Useful height | 480 mm. |
| - Useful stroke | 480 mm. |
| - Spindle moulder shaft dia. | 50 mm. |
| - Max. tool dia. | 220 mm. |
| - Suction hood dia. | 150 mm. |
| - Shaft rotation speed | 6000 r.p.m. |
| - Motor power | 10 hp (7,5 kw) |
| |
| Technical data: BATTEN MAKER DEVICE | |
| - Blade dia. | 200 mm. |
| - Spindle dia. | 35 mm. |
| - Pneumatic vertical positioning programmable from | |
| computer through manual turret with 4 positions | |
| - Manual horizontal positioning | |
| - Spindle useful length | 20 mm. |
| - Suction hood dia. | 80 mm. |
| - Motor power | 3 hp (2,2 kw) |
