| GAM 10 ANGULAR WINDOW WORKING CENTRE | |
| | |
| Electronic programmer with 6" colour video: | |
| - Possibility to enter single programs, complete | |
| working cycles | |
| - Automatic calculation of the entered quantities USB | |
| | |
| Technical data: TENONING UNIT | |
| | |
| - Sliding table stroke | 2000 mm. |
| - Useful height of programmed units | 320 mm. |
| - Useful stroke of spindle moulder axis | 280 mm. |
| - Spindle moulder axis diam. | 50 mm. |
| - Max. diam. of programmed tools | 320 mm. |
| - Saw blade diam. | 400 mm. |
| - Max. cut height | 120 mm. |
| - Horizontal movement of saw blade | 100 mm. |
| - Motor power: | |
| saw axis | 4 hp (3 kw) |
| spindle moulder axis | 10 hp (7,5 kw) |
| - Suction dust hoods diam.: | |
| saw axis | 120 mm. |
| spindle moulder axis | 150 mm. |
| | |
| Technical data: PROFILING UNIT | |
| | |
| - Height of the 1st counter-supported profiling | |
| spindle moulder axis | 320 mm. |
| - Useful height of programmed units | 320 mm. |
| - Useful stroke of spindle moulder axis | 280 mm. |
| - Spindle moulder axis diam. | 50 mm. |
| - Max. diam. of programmed tools | 220 mm. |
| - Motor power: spindle moulder axis | 7,5 hp (5,5 kw) |
| - Suction dust hoods dia.: | |
| spindle moulder axis | 150 mm. |
| | |
| Technical data: BATTEN MAKER DEVICE | |
| | |
| - Blade dia. | 200 mm. |
| - Spindle dia. | 35 mm. |
| - Spindle useful length | 20 mm. |
| - Spindle rotation speed | 6000 r.p.m. |
| - Pneumatic vertical positioning programmable from | |
| computer through manual turret with 4 positions | |
| - Manual horizontal positioning | |
| - Suction dust hood dia. | 80 mm. |
| - Motor power | 3 hp (2,2 kw) |
| - Net weight | 3000 kg. |
| | |
| | |
