| GB 6/15RA EDGEBANDER W/ROUNDING DEVICE | |
| The machine is complete with: | |
| - PRE-MILLING UNIT separate time entrance | |
| with 2 HF motors - 12.000 rpm - 2,5 hp (1,8 kw) each - | |
| 1st anti-clockwise rotation - 2nd clockwise rotation. | |
| With 2 cutters dia. 80x50xH20 mm | |
| - END-CUTTING UNIT - 2 tilting motors HF 0,5 hp (0,38 kw) | |
| - EDGE-TRIMMING UNIT - 2 motors HF 1 hp (0,75 kw) | |
| and micrometric adjustment with digital numerical read-out | |
| - FINE-TRIMMING UNIT - 2 tilting motors HF 0,5 hp (0,38 kw) | |
| and micrometric adjustment with digital numerical read-out | |
| - ROUNDING UNIT: | |
| * Comtrolled by PLC "SIEMENS" with ON-OFF positioning | |
| * Max working heigh 45 mm | |
| * No. 2 separate motors HF 0,75 hp (0,55 kw) | |
| * Sliding on double linear guides | |
| * Finishing of no. 4 top and bottom angles | |
| * No. 2 cutters with 4 knives 2 mm radius, for | |
| 'radius' machinings with edges from 1 to 3 mm and | |
| 'straight' machinings with edges from 0,4 to 1 mm | |
| - EDGE-SCRAPING UNIT with digital numerical read-out | |
| - BUFFING UNIT with 2 motors 0,25 hp (0,19 kw) | |
| with cloth discs dia. 150 mm | |
| Technical data: | |
| - Min width of the panel | 60 mm |
| - Min length of the panel | 120 mm |
| - Max thickness of the panel | 60 mm |
| - Min thickness of the panel | 10 mm |
| - Edge dimensions in strips (GB 4/8A-GB 5/8RA) | 0,4-8 mm |
| - Edge dimensions in strips (GB 6/15RA) | 0,4-15 mm |
| - Edge dimensions in roll | 0,4-3 mm |
| - No. 2 feed speed | 12-16 m/1' |
| - Glue tank capacity | 4 lt |
| - Installed motor power GB 4/8 A | 8 kw |
| - Installed motor power GB 5/8 RA | 12 kw |
| - Installed motor power GB 6/15 RA | 13 kw |
| - Air pressure | 6 bar |
| - Net weight GB 4/8 A | 1720 kg |
| - Net weight GB 5/8 RA | 1970 kg |
| - Net weight GB 6/15 RA | 2060 kg |
| | |
| | |
| | |
| | |
| | |
| | |
