| UNICA 500E PANEL SAW/ SLIDING TABLE 3200 | |
| Panel saw with tilting blade | |
| * 2 axes scoring unit with ON-OFF motorized adjustment | |
| * Motorized lifting movement of the blade | |
| * Motorized tilting movement of the blade | |
| * Electronic digital read-out of blade lifting | |
| * Electronic digital read-out of blade tilting | |
| * Direct start | |
| | |
| Technical data: | |
| - Sliding table sizes: | |
| - UNICA 500/2150 | 385X2150 mm. |
| - UNICA 500/2600 | 385x2600 mm. |
| - UNICA 500/3200 | 385x3200 mm. |
| - UNICA 500/3800 | 385x3800 mm. |
| - UNICA 500/4300 | 385x4300 mm. |
| - Cross-cut capacity sliding table 2150 | 2170 mm. |
| - Cross-cut capacity sliding table 2600 | 2700 mm. |
| - Cross-cut capacity sliding table 3200 | 3260 mm. |
| - Cross-cut capacity sliding table 3800 | 3870 mm. |
| - Cross-cut capacity sliding table 4300 | 4370 mm. |
| | |
| - Main blade dia. (standard) | 450 mm. |
| - Cut height at 90° | 155 mm. |
| - Cut height at 45° | 105 mm. |
| | |
| - Main blade dia. (on request) | 500 mm. |
| - Cut height at 90° | 180 mm. |
| - Cut height at 45° | 122 mm. |
| | |
| - 4 rotation speed | 3000-4000-5000-6000 r.p.m. |
| - Blade tilt (UNICA 500 - UNICA 500E) | 0°-46° |
| - Blade tilt (DIGIT 2 - DIGIT 3 - PROGRAM) | +1°-46° |
| - Scoring blade dia. | 125 mm. |
| - Cut width between blade and rip fence | 1250 mm. |
| (UNICA 500 - UNICA 500E - DIGIT 2) | |
| - Cut width between blade and rip fence | 1600 mm. |
| (DIGIT 1-DIGIT 3-PROGRAM) | |
| On request all models can be supplied with | |
| with rip fence with opening | 1050 - 1300 mm. |
| - 2 suction hoods dia. | 80 - 120 mm. |
| - Motor power | 7,5 hp (5,5 kw) |
